How to Use the Collection Kit
Bacteria Testing Guide
Looking for Mold Sampling Instructions? Go to Mold
What do I need?
Your Collection Kit
You’ll receive your collection kit in the mail. First check the side of your plate to confirm you are using a bacteria TSA plate.
Register your kit and then you’ll be ready for testing.
Have you registered your kit?
Bacteria Collection Step-by-Step Instructions
Follow the steps below or view our video guide.
1
Preparation
Evaluate What Needs to be Tested.
Evaluate all areas that should be tested including vehicles and even pets.

NOTE: Be sure to use sampling plates before expiration date.
Expiration date is located on the side of each plate. Store at room temperature.
Test areas with known or suspected water leaks (e.g., roof leaks, flooding, pipe leaks) and locations with unpleasant odors. If specific areas cause sneezing and coughing, they should be included. Include more than one bacteria plate in large areas or rooms.
We recommend testing each of the following areas:
Bathroom
Basement
Master Bedroom
Den/Great Room
Car
Kitchen
Child's Bedroom
Office (Home & Work)
Laundry room
2
Sample
Sample Your Rooms, Cars, Pets, and Surfaces for Bacteria.
Sample as soon as possible, but do not open bacteria plates until you are ready to use them.
Rooms
When testing a room, select an area to place a bacteria plate that is at least 2 feet from the wall.
Remove the bacteria plate lid and place bottom (contains yellow agar) on a flat surface to test for one hour.
Review this preparation checklist before sampling.
Keep windows closed for at least six hours prior to testing.
Turn on the central fan of the heating and air conditioning system.
Turn off stand-alone air purifiers minimum of 6 hours (preferably 24 hours) prior to testing.
Don’t sweep or vacuum just before the test.
Rooms can be used as normal during sampling including children and pets. Please ensure pets don’t touch or lick plates.
Vehicles
When testing a vehicle, keep windows and doors closed during the entire process, other than entering and exiting the vehicle.
Remove the bacteria plate lid and place a plate on a paper towel on the front passenger’s seat or center console.
Turn on your engine and let the air-conditioner or heater blow for 30 minutes on re-circulate (Max). Turn off the car and let the plate sit for another 30 minutes.
Pets
Tap test when testing a particular piece of furniture, rug, car seat, carpeting, pillow, sofa, pet, or any textile.
Wash & dry your hands thoroughly prior to testing.
Hold the plate so the yellow agar is facing towards the object or pet. Tap the object 4 times (The yellow agar should not touch the object). This will force the bacteria into the air and onto the plate.
3
Seal & Label
Seal With Parafilm and Label Bottom of Your Samples.
Record each sample’s information on the Sample Label. Close each bacteria plate with included parafilm for a secure seal. Then transfer the sample information to Lab Analysis form.
Bacteria Sample Label
Create a label for each sample with a unique name and the date and time of testing. Place it on the bottom of the plates (the darker side with the agar). Immediately place the samples in the foil envelope.
Complete Lab Form
Record your samples on the Lab Analysis form, matching the information from each respective label.
4
Prep for Analysis
Properly Pack and Send Your Samples for Lab Analysis
Lab must receive sample within 2 days of sampling.
Ensure your overnight shipping method will deliver your samples in time.
Place Samples in the Protective Bag and then in the box.
Only include the samples you would like analyzed.
Fill out the Lab Processing form and place in the box.
Follow the instructions on the Lab Processing Form.
Fill with packing material and send the kit to the lab.
ImmunoLytics • 5930 Midway Park Blvd. NE • Albuquerque, NM 87109
Use your pre-paid lab return label or print your own label
Seal and Store
Ensure all of your samples are sealed, labeled and placed in foil bags.
Store in dark place
Place foil bags in a warm (68 – 85ºF), dark place such as a kitchen cabinet or desk drawer.
Wait 5-6 days
After 5 to 6 days pull the samples out for analysis. If there is no bacteria growth, place the samples back in the foil packet and reanalyze after 7 to 8 days.
Check for Bacteria
Hold a bacteria plate up to a light and count the number of colonies (circles) growing on the agar. Compare to our health scale. Size of the circles is not important.
Read your gravity plates
Colony Count and Health Effects
0 to 9 total colonies per area (room)
Is within a normal range.
10-99 total colonies per area (room)
Is cause for concern-illness is probable in individuals who are susceptible.
100 or greater total colonies per area (room)
Is hazardous-illness likely in individuals who are susceptible.
5
Consultation
Prepare for Your Consultation
Once the lab analysis is complete, one of our Environmental Experts will call you to review your lab results and make recommendations. They’ll answer your questions and provide guidance as you navigate through the process to improve your environment and your health. In preparation for your consult, fill out the Consultation worksheet on the last page of your report, or download it below.
Call us any time to discuss your situation before or after purchase!
Frequently Asked Questions About Bacteria Testing
What does an ImmunoLytics bacteria test detect?
ImmunoLytics bacteria testing uses a Gravity Plate to collect air samples from your living environment. The plates are left open-side-up in a room to capture airborne bacteria, then sent to the ImmunoLytics laboratory for analysis. Results quantify the total bacteria present in your home’s air and report colony counts using the ImmunoLytics health scale.
How is bacteria testing different from mold testing?
Mold and bacteria are different types of microorganisms requiring separate testing methods. Mold spores are fungal and identified at the genus level through spore analysis. Bacteria are single-celled organisms quantified using Gravity Plate testing — which measures total bacterial load rather than identifying specific species. Both types of testing are recommended for a complete picture of your indoor air quality.
Which rooms should I prioritize when testing for bacteria?
The highest-priority areas for bacteria air testing include bathrooms, kitchens, basements, and laundry rooms — spaces where moisture and humidity allow bacteria to thrive. Bedrooms, home offices, and children’s rooms are also worth testing, particularly if household members experience recurring respiratory issues, skin irritation, or unexplained illness.
How long does it take to receive bacteria test results?
Standard bacteria test results are delivered within 5–7 business days of the laboratory receiving your Gravity Plate sample. Rush processing is available for faster turnaround. Results report total colony counts with ImmunoLytics health scale classifications so you can clearly understand whether your bacteria levels are normal, elevated, or high.
What do elevated bacteria colony counts mean?
Elevated bacteria colony counts indicate that airborne bacterial levels in the sampled room exceed typical household baseline ranges. While not all bacteria are harmful, high counts — particularly in sleeping areas or rooms used by children or immunocompromised individuals — may warrant improved ventilation, targeted cleaning, or a consultation with an ImmunoLytics expert to determine next steps.
Related resources: 3-plate bacteria test kit · why test for bacteria · self-analyzing bacteria plates · sampling video guide · interpreting your results
About ImmunoLytics
ImmunoLytics is a professional mold and bacteria testing laboratory dedicated to helping homeowners, renters, and businesses understand what is living in their environments. Our DIY test kits make professional-grade surface analysis accessible and affordable — no on-site inspector required.
Every sample submitted to ImmunoLytics is analyzed by our laboratory scientists using advanced culture and microscopy techniques. Bacteria test results quantify bacteria, delivering actionable data with an easy-to-understand health scale. We offer standard and rush turnaround options to fit your timeline.
Beyond lab analysis, ImmunoLytics offers one-on-one consultations with Certified Mold Inspectors and Certified Mold Remediators who can help you interpret bacteria results, understand potential health implications, and determine whether remediation or additional testing is warranted.
